A Walking Polymer Advertisement

Text or Letters. There are so many ways to use them to create art. The September Polymer Clay Guild of Etsy challenge theme is just that: Fun with ABCs, basing your art around letters or words. I had so many ideas floating around in my head for this challenge. But, as the month of August marched on, I found myself with limited time to create. Then, the recurrence of a health issue for a family member meant I wouldn't even have time to be in my studio, so I had to come up with something that would be portable, which meant limited supplies. Hmm, this meant no pasta machine or needing to juggle sharp blades... which for my mind, spelled out using paintbrushes and liquid polymer. That thought was when my final inspiration struck!

I had purchased some very inexpensive T-shirts which I wanted to decorate with polymer, you may remember my previous polymer decorated T-shirt which you can find here. But this time, I wanted the design to be more contiguous, which meant that I needed the polymer to be super flexible, as a t-shirt decal would be. I could have tried straight liquid polymer, but I knew that would result in a stiffer (more uncomfortable) product, so I came up with a concoction of liquid polymer plus 2 additives. The cured texture of this mixture is more like a rubbery latex material and it flexes beautifully with the fabric! The only problem is that when too much of one of the ingredients is added it creates a gummy, gooey blob. And when too much of the other ingredient is added it created a smoother product, but one which didn't cure fully. So, it required a lot of patience and trial and error. I am not revealing my concoction yet, because I feel it is not perfected. I do have some ideas of how to make it even better, which I want to explore before I reveal my mad scientist experimentation results.

So, I set to work and created a T-shirt painted with my business logo. The front was bedecked with the chosen font of my business name logo, and on the back of the T-shirt, I tried my best to simplify and capture (in painted polymer) my polymer quilled globe design (which has become my business logo - see the header of the blog above), plus the text of the web address of this blog.

Unfortunately, time was running low and when it was time to paint the inside of the continents (the very last thing I did), I was left with the choice of letting them go unpainted, or painting them with a combination of straight liquid polymer from 2 different brands. As I had predicted, the result of the straight LPC, without my secret additives, was a stiff texture. Luckily, these are such small areas, that it will not detract from the comfort of the T-shirt. Unfortunately too, I was unable to add the scrolled faux quilled design to the interior of the continents, due to lack of time.

All-in-all, I'm happy with the results of my experimentation and my new walking advertisement for my business! As I alluded, I am wanting to experiment further with this idea, and have a stack of T-shirts piled up, waiting to be decorated. When I get the combination adjusted to a well workable, curable and predictable mixture, I'll be ready to share my experimentation and results, possibly in the form of a tutorial. Thanks for stopping by my blog to check out my logo T-shirt project! I'd love to hear your thoughts on this piece, please consider leaving me a comment below! Voting opens for this PCAGOE challenge on September 1st and will run through the 7th at midnight EST. I'll try to post a reminder here, when voting is open.

A Polymer Cover-up

I'm posting about a project that was completely independent, i.e. not driven by a guild challenge! ;) Don't get me wrong, I love my guild challenges, but I never seem to post about other projects here. This one happened because I have this coral/salmon colored t-shirt that acquired some bleach spots at the bottom. I love the cut and fit of this t-shirt and really didn't want to retire it to the household chore wardrobe. So, I decided to cover up the spots, with polymer!

I sketched out a basic radial design in washable fabric pen, then I set to work attaching small circle and oval cut outs of polymer in shades of blue and white (yep, still in that orange/blue phase that I've been in for the last 2 months...) ;) The blue and white clays were rolled out to a thin gauge (#4 on my Imperia pasta machine, which has a range of 6 different thicknesses, #1 being thickest and #6 being thinnest). I used a tiny round kemper cutter to cut the round circles, and I used the empty ferrule of an old paintbrush that lost it's bristles to make the tiny oval slivers. I kept the cut pieces small to eliminate cumbersome feeling within the shirt and keep the fabric movable. I attached each cut shape by applying bake n bond to the backside of the polymer pieces. I worked in segments of about 6" by 8", curing in between segments to keep the areas for curing totally flat in the oven. 

Here's a shot of the shirt before the applied polymer, you can see the bleach spots (lower center and right) that I was trying to mask:

So, next time (and I do plan to do more of these), I will use a thinner setting on the pasta machine for my polymer sheeting, probably #5. While the #4 guage worked okay here, it did add a bit of weight to the shirt. I also think that a thinner setting will make for a sturdier design. You might ask, is it machine washable? I tested that, this shirt has gone through the wash on a normal cycle and survived, only one of the polymer pieces came off (as you can see in the front view below). This I consider a success, and I will be replacing the piece that came off. If you decide to try this for yourself, please consider washing your finished garment (in cold water only) with small loads of laundry or, choose delicate cycle or hand wash to avoid causing any missing pieces... and always air dry (heat from the dryer could effect the polymer).

The design wraps around the side and also spreads across the back. Here's the flat back view:

And the flattened side view:

I had so much fun making this, I love that I saved a favorite shirt, and I love how it turned out! I can hardly wait to jazz up another piece of clothing! I can also see this idea put into use to cover up unwanted holes in clothing.... lots of ideas running around in my head! So, until my next project posting, leave me a comment and tell me what you think about my polymer bedecked T-shirt... Thanks!

UPDATE 7/19/15: I just reattached the one piece that went missing after machine washing, and I removed and replaced the one circle that (for whatever reason) got a little darker than the rest.  It must have been touching the side of the oven at one point and got a bit scorched. Let me tell you, removing that little circle was tough! I couldn't believe how fast it was attached... and it ended up tearing into the blue clay and leaving a bit of the blue behind... I was thinking it would just pop off with a little pressure, but it did not! So, now I'm even more certain about the strength of these little pieces attached to the shirt. 

I'm so happy to report that this project was shared on Polymer Clay Daily!! Here's the link:

http://polymerclaydaily.com/2015/07/20/polymer-cover-up/comment-page-1/#comment-341701

A Challenge for Charity... Last day to vote!

Today is the last day to vote for the August PCAGOE challenge. 

About the Challenge:  (Copied from the PCAGOE blog)

For our annual "Charity Challenge" we chose The Global Genes Project, 7000 Bracelets for Hope, which provides bracelets for the rare and genetic disease community. Bracelets needed to be blue, in keeping with the project's color theme. 

Entries for this challenge were sent directly to the organization and will not be in the artists' shops. But, if something that you see in the entries is of interest, you might contact that shop to inquire about creation of a similar item :) 

Here are the entries:

Please go to the PCAGOE blog and vote for your three favorite entries by midnight EST August 7th 2012.

And check out the Global Genes Project to read more about this great charity and how you can contribute.

It's been a crazy month of harvesting, cooking and preserving lots of veggies and fruits, but I did manage to whip up an entry for this month's challenge.  The design of this piece was inspired by the beautiful upcycled T-shirt band bracelets designed by fellow PCAGOE member Marcia Palmer.

Here is a larger image of my entry:

You can view other shots of this bracelet (and lots of my other work) on my Flickr photostream.